You have 0 items in your cart.
1. Capable of performing measurements on a wide range of material, including metals, plastic, ceramics, composites, epoxies, glass and other ultrasonic wave well-conductive materials. 2. Transducer models are available for special application, including for coarse grain material and high temperature applications. 3. Probe-Zero function, Sound-Velocity-Calibration function. 4. Two-Point Calibration function. 5.Coupling status Indicator showing the coupling status. 6. Battery information indicates the rest capacity of the battery. 7. Auto sleep and auto power off function to conserve battery life. 8. Optional software to process the memory data on the PC. 9. Optional thermal mini-printer to print the measured data via RS232 port. 10. Adjust gain function ,can easy to test the cast iron material.
Color 320x240 Pixels Display A-Scan Snapshot Echo-Echo Mode(Thru Paint & Coatings) Stores 100,000 Readings Gain: Low, Medium or High for varying test conditions
*Color OLED 320x240 Pixels Display *Live Simultaneous Color A-Scan and Thickness Display *Control of Gain, Blanking, Gate, Range, Delay, RF and Rectify Modes *Time-based B-Scan Display *Echo-Echo Mode,Thru Paint & Coatings
HIGH ACCURACY AND RESOLUTION UP TO 0.001mm or 0.0001 inch MEASURING ULTRA THIN SAMPLE AS LOW AS 0.15mm or 0.006 inch DISPLAY UNITS : IMPERIAL and METRIC AUTOMATIC SELF CALIBRATION COUPLANT INDICATOR AUTOMATIC POWER OFF DEVICE HIGH-LOW LIMIT ALARM LCD BRIGHTNESS ADJUST LOW BATTERY INDICTOR TECHNICAL SPECIFICATIONS: Measuring Range (for steel) Interface-Echo Mode: (I-E or Standard Mode) 1.50mm – 20.0mm (0.059in – 0.787 in) Echo-Echo Mode: (E-E or High Precision Mode) 0.15mm – 10.0mm (0.006in – 0.394in) Measuring Accuracy ±0.005mm or 0.0002 inch (if thickness < 3mm) ±0.05mm or 0.002 inch (if thickness < 20mm) Display Resolution mm : 0.1 / 0.01 / 0.001 inch : 0.01 / 0.001 / 0.0001 Sound Velocity Range 1000 to 9999 m/sec (0.0394 – 0.3936 inch/ms) Measuring Refresh Frequency 4Hz in normal mode, up to 25Hz Memory Capacity 500 test values Multiple Calibrations One point or Two Point Display LCD 42×57mm LCD size with EI backlight and adjustable contrast, font size up to 13.75mm (0.54 inch) Power...
HIGH ACCURACY AND RESOLUTION UP TO 0.001mm or 0.0001 inch MEASURING ULTRA THIN SAMPLE AS LOW AS 0.15mm or 0.006 inch DISPLAY UNITS : IMPERIAL and METRIC AUTOMATIC SELF CALIBRATION COUPLANT INDICATOR AUTOMATIC POWER OFF DEVICE HIGH-LOW LIMIT ALARM LCD BRIGHTNESS ADJUST LOW BATTERY INDICATOR STANDARD DELIVERY: Main Processor with Calibration block (4.00 mm) Precision Probe (D11R) with Replaceable Delay Tip Coupling Paste Operation Manual Consumer-Type 2 AA Type Alkaline Battery (3 Volt) Carrying Case
Features 1.Capable of performing measurements on a wide range of material, including metals, plastic, ceramics, composites, epoxies, glass and other ultrasonic wave well-conductive materials. 2.Transducer models are available for special application, including for coarse grain material and high temperature applications. 3.Probe-Zero function, Sound-Veloctiy-Calibration function. 4.Two-Point Calibration function. 5.Coupling status Indicator showing the coupling status. 6.Battery information indicates the rest capacity of the battery. Ultra-low power consumption, it is can continue working 100 hours. 7.Auto sleep and auto power off function to conserve battery life. 8.Optional Usb datapro software to process the memory data on the PC. 9.Optional thermal mini-printer to print the measured data via USB port. 10,Adjust gain function, can easy to test the cast iron material.
Category:
CROSS HATCH CUTTER
Specifications H cross hatch cutter is applicable to determine the adhesion of organic coatings by cross-hatching. This instrument is designed for assessing the resistance of paint or related coatings to separation from substrates when a right-angle lattice oattern is cut into the coating, penetrating through to the substrate. The Cross Hatch Cutters conform with the requirements of :BS 3900 E6;BS/EN ISO 2409;ASTM D 3359;GB/T 9286, ,it is economy. Main Technical Parameters: 1.Six working side blades:When the blade edge is not sharp enough, users can loosen the boat type nut and top thrust screw to change blade. 2.Multi-cutting blades spacing:1mm/2mm/3mm 3.The number of square:25squares/100squares
TEN810-Datalogging Large Wall Display Temperature /Humidity Monitor with 95dB Sound Alarm/Controller
Category:
Wall-display humidity meters
Complete environmental monitor and alarm - Wall-Mounted LED type, easy reading - Alarm set for Hi and Low limit-Temperature and Humidity - Data Logging Capacity 30,000 records - LED displays real time data - USB interface- XL Display: 260 x 178 x 47mm- High Accuracy and high sensitivity